sony cinema studio ex subwoofer not working

Sony cinema studio ex subwoofer not working tv#

Sony cinema studio ex subwoofer not working tv#

Swap the TV network connection from wireless to wired, to limit any possible subwoofer connection interference.Try switching the setting to, and then change it back to again.Keep the subwoofer and soundbar as close to each other as possible.Remove any obstacles between the subwoofer and soundbar. Try keep a clear path between the subwoofer and the soundbar.Sony Music Classic artists to today’s stars, local and global. Sony Pictures The hub for your favourite movies and TV shows. These could include a wireless LAN or a microwave oven. Sony and the Environment How we’re reducing our eco-footprint through energy efficiency and recycling initiatives. Be sure to keep the subwoofer and soundbar away from any other devices nearby that generate electromagnetic waves.Also check whether the holes for ventilation on the subwoofer are not blocked. Is the power indicator on the subwoofer flashing red? Turn the subwoofer off by pressing (power) on the subwoofer.Check the status of the wireless connection.Try the connecting instructions here for connecting the subwoofer to the soundbar.Pressing the + (subwoofer volume) button or BASS button on the control will turn the volume up on the subwoofer. Use the remote control to turn up the volume from the subwoofer. You can tell if it is on by the LED indicator light lit or flashing. Make sure the subwoofer is near to the compatible soundbar model so that the light turns green Make sure the wireless subwoofer is turned on correctly.Is the power indicator red or slowly flashing green? Try to following:.Turn the power on by pressing the power button on the subwoofer.Ensure the mains lead AC power cord is connected properly on the subwoofer.Still no green light on the power indicator? Try the following: Is the power indicator on the wireless subwoofer lit in green? No? Make sure that the power indicator on the subwoofer is lit in green.Start by increasing the subwoofer volume by pressing the SW (volume) + or BASS + on the remote control of your subwoofer.No sound or only a very low-level sound is heard from the subwoofer? No sound or only a very low-level sound is heard from the subwoofer?.Select START, and then the system settings returns to the factory default.Select RESET by pressing the ↑ (upper) or ↓ (lower) button.Note that the SPEAKER is displayed in the front panel display.

Press the MENU button on the remote control.All the indicators will flash 3 times).Press and hold the (power) and - (volume down) button on the Soundbar for more than 5 seconds.Disconnect the AC power cord, and then plug it back in.Press and hold the (power) button of the subwoofer and rear speakers for more than 10 seconds.(Note that RESET will appear on the display for a moment). Disconnect the HDMI cables from the speakers and connected devices.HT-MT500: You can initialise the speakers on the HOME menu: HOME → Resetting → Reset to Factory Default Settings.At the same time, press and hold the (power) and - (volume down) button on the Soundbar for at least 5 seconds.When RESET disappears, unplug the AC power cord, then plug it back in.When START appears on the Soundbar display, press ENTER.Then RESET appears on the display.Select Reset to Factory Default Settings.Examples of headings sections in the instructions manualīelow are examples of how to reset or initialise the audio system:.For details, refer to the instructions manual. When the LED lights up in red after turning on the audio device, the link or the connection between the Soundbar speaker and the subwoofer may not be complete.Check the status of the subwoofer LED indicator.The button name may vary depending on the model.On the remote control, press the SW + (subwoofer volume) or Bass button to turn up the volume of the subwoofer.If any LED indicator is lit or flashing, the power is ON.Verify that the subwoofer is turned ON.NOTE: If you have the HT-RT5 Soundbar and no sound is output from the surround speaker, the following instructions are the same as for the subwoofer.įollow these steps to troubleshoot the issue: If model-specific information is needed to perform any step, check the product manual. Check Applicable Products and Categories for details.įollow the instructions according to the symptom and check the sound after each step. IMPORTANT: This article applies only to specific products and/or operating systems.